A little help for the road ahead.Free to browse, with no sign-up
RV error codes
Truma RV water heater and furnace error codes.
We list 42 Truma codes from the maker’s own manuals. Find yours to see what it means, what you can safely check, and when to call a tech. Need a tech now?
If you smell propane, see smoke, or a CO alarm goes off, turn it off, get everyone out, and call 911.
Truma AquaGo tankless water heaters
Where the code shows: A yellow light flashes fast twice, and a red light under the rocker switch blinks short and long flashes in a pattern every 3 seconds; with a CP plus panel the number shows on the screen, such as E or W and the number.
To reset: Turn the heater off, wait 5 seconds, then turn it on again; if the code stays, contact a Truma service center.
1
No flame
AquaGo basic, comfort and comfort plus
The heater tried to light three times. It could not make a flame.
If you smell propane, turn off the tank valve, get everyone out of your RV, and call for help from outside.
What you can check
Make sure the propane tank has gas and the tank valve is open.
Turn the heater off, wait 5 seconds, then turn it on again.
When to call a tech
If the code comes back after a reset, call a tech. The igniter or gas valve may need service. Find a mobile tech near you
Where the code shows: On the CP plus control panel as a W (warning) or E (malfunction) with the code number and an H for the furnace.
To reset: Fix the cause, then tap the rotary button on the CP plus to restart the furnace; this can take a few minutes.
112
Gas off or furnace too hot
Combi with the CP plus panel
The Combi is not getting gas, or it got too hot and shut off.
If you smell propane, turn off the tank valve, get everyone out of your RV, and call for help from outside.
What you can check
Make sure the propane tank has gas.
Make sure the gas shut-off valve is open.
If it got too hot, turn the furnace off and let it cool. Then check that the warm air outlets and the air intake are not blocked, and turn it on again.
When to call a tech
If the code comes back after these checks, call a tech. The Combi may need service. Find a mobile tech near you
The Combi is not getting gas, or it got too hot and shut off.
If you smell propane, turn off the tank valve, get everyone out of your RV, and call for help from outside.
What you can check
Make sure the propane tank has gas.
Make sure the gas shut-off valve is open.
If it got too hot, turn the furnace off and let it cool. Then check that the warm air outlets and the air intake are not blocked, and turn it on again.
When to call a tech
If the code comes back after these checks, call a tech. The Combi may need service. Find a mobile tech near you
The Combi is not getting gas, or it got too hot and shut off.
If you smell propane, turn off the tank valve, get everyone out of your RV, and call for help from outside.
What you can check
Make sure the propane tank has gas.
Make sure the gas shut-off valve is open.
If it got too hot, turn the furnace off and let it cool. Then check that the warm air outlets and the air intake are not blocked, and turn it on again.
When to call a tech
If the code comes back after these checks, call a tech. The Combi may need service. Find a mobile tech near you
The Combi is not getting gas, or it got too hot and shut off.
If you smell propane, turn off the tank valve, get everyone out of your RV, and call for help from outside.
What you can check
Make sure the propane tank has gas.
Make sure the gas shut-off valve is open.
If it got too hot, turn the furnace off and let it cool. Then check that the warm air outlets and the air intake are not blocked, and turn it on again.
When to call a tech
If the code comes back after these checks, call a tech. The Combi may need service. Find a mobile tech near you
The heater tried to light three times. It could not make a flame. If the code comes back after a reset, call a tech. The igniter or gas valve may need service.
What does Truma code 2 mean?
A safety switch on the burner or the exhaust is open or came loose. If the code comes back after a reset, call a tech. A tech needs to check the safety switches.
What does Truma code 3 mean?
The flue fan did not push enough air out, or the switch is stuck. The exhaust may be blocked, or a part is bad. If the code comes back after a reset, call a tech. A tech can check the exhaust, the fan, and the switch.
What does Truma code 4 mean?
The water got too hot, over 185 degrees F, and a safety switch opened. If the code comes back after a reset, call a tech. A tech needs to find out why the water got so hot.
Where these codes come from.
We read each Truma manual below and wrote the codes in plain words. If your manual says something different, follow your manual.